Boiler Repair in Mitcham - Affordable Emergency Repairs

Do you know that sound kettles make when there is boiling water inside? If your boiler makes banging noises, it means it’s working harder than usual in order to heat the water. The reason is simple. Water, especially hard water, contains calcium, magnesium, and other minerals that can solidify into limescale.

When limescale builds up, it creates a coating on the pipes that can sometimes obstruct the water flow. This makes a new boiler work extra hard, hence the noises. Our Gas Safe heating engineers in Mitcham are well acquainted with this issue and know how to handle it.

Sometimes boilers can leak from different places and the reasons vary. It could be due to a corroded heat exchanger, loose joints, corroded pipes, loose joints, etc. Before the boiler problem is addressed, the technician needs to identify the cause and trace back the dripping to its source.

The thermostat of your boiler system is a crucial part of the machine that helps to maintain the temperature to the desired setpoint. If it’s not working properly, you will find that the water isn’t as hot as you need it or that the heating around your home is turning on and off randomly.

When the thermostat is malfunctioning, the first step is to check whether the correct settings are in place. If it turns out to be a different issue, the thermostat might have to be replaced.

Another common boiler problem is the boiler’s inability to heat the water. There are many issues that can lead to this issue such as a faulty valve, blocked heat exchanger, or a faulty pilot light. If you are faced with such an issue, you should let our Gas Safe engineers inspect the area and detect the cause.

The circulation of water in the boiler works thanks to high pressure. When there is low water pressure within the system, it doesn’t function well. There may be a leak or a problem with the pressure relief valve or something else might be going on. No matter the type of central heating repairs you need, our local plumber is here for you, equipped with the best tools and ready to restore hot water flow in an efficient manner.

Newer models typically use condensate pipes to eliminate waste gas. During the winter season, as outdoor temperatures drop, it increases the risk of your condensate pipe freezing. Modern devices will display this error on the interface. If this is the case, the faulty pipe will have to be warmed up and defrosted.

This is usually an issue with older models that need a pilot light to ignite. If the light keeps turning off, it may be that the thermocouple is faulty. All things considered, you should check with a qualified specialist.

If the system won’t ignite, it could be an electrical issue you are dealing with. Make sure your boiler system is connected properly. You also want to check out other gas appliances around the home. If they don’t power on either, you should get an electrician to inspect the issue further and provide any electrical work as necessary.

If some of your radiators suddenly stop getting as hot as they should, this is an issue. Can you feel cold patches as you run your hand through the surface? Or is the radiator cold at the bottom? This means the heat is not evenly distributed as a result of sludge build-up or too much air within the devices.